Silicone-free high-gloss polis for orbital polishers. Single-stage polishing of light paint defects or for a finish after previous polishing with ExCut 05-05
Shake bottle before use. Depending on the size of the backing plate, apply the product to the Orbital Polishing Pad medium 143 DA (04933410) or 165 DA .
If necessary, wet sand flaws with abrasive paper of P2000 or finer beforehand.
Polishing procedure phase
1: Pressure: max. 5 kg — Speed*: approx. 2000 rpm — Time: 20 sec Polishing procedure phase
2: Pressure: 1 kg — Speed*: approx. 4000 rpm — Time: 120 sec The times given refer to one polishing cycle of an area to be polished of approx.
1 sqm with average hard paintwork.
Speed varies depending on the type of machine.
Remove residue with a SONAX Microfibre Cloth soft touch.
Randomly check the polishing result by wiping with SONAX PROFILINE Prepare applied to a Microfibre Cloth soft touch and illuminating with a hologram lamp.
Regularly clean polishing pads.
Never use different polishes on one pad.
Do not use on hot surfaces.
PLEASE NOTE: Protect against frost.